Canon imagePRESS Lite C170 - Booklet Finisher-AC1 and Staple Finisher-AC1; 2;3 Hole Puncher Unit-A1; Puncher Unit-BS1; Puncher Unit-BT1

Canon imagePRESS Lite C170 Series Service Guide
imagePRESS Lite C170 Series Service Guide March 2022
Revision 11 Page 16
N. Booklet Finisher-AC1 and Staple Finisher-AC1
• Finisher provides stacking for up to 3,500 sheets of LTR paper
(20 lb bond (80 g/m
2
)).
• Supports corner or double staple up to 65 sheets of LTR paper
(20 lb bond (80 g/m
2
)).
• Supports Staple Free Binding for up to 4-sheets of paper
(20 lb bond (80 g/m
2
)).
• Supports paper weights up to 110 lb Cover (350 g/m
2
).
• Saddle Stitch Booklet making for up to 20-sheets (20 lb bond (80 g/m
2
)) or
80 imaged sides. Booklet Finisher-AC1 only.
• Supports Saddle folding for up to 3 sheets. Booklet Finisher-AC1 only.
• The optional Finisher Jogger Kit-A1 attaches to the output tray, and aligns
the output paper.
O. 2/3 Hole Puncher Unit-A1
• Inner puncher provides 2-hole and 3-hole punch capabilities for either the
Staple Finisher-AC1 or Booklet Finisher-AC1.
• Supports 2-hole punch for LGL, LTR, LTRR and 11" x 17 paper.
• Supports 3-hole punch for 11" x 17", LTR and EXEC paper.
• Supports paper weights up to 130 lb cover (350 g/m
2
).
P. Puncher Unit-BS1
• Inner puncher provides 2-hole and 3-hole punch capabilities for either the
Staple Finisher-W1 PRO or Booklet Finisher-W1 PRO.
• Supports 2-hole punch for LGL, LTR, LTRR, 11" x 17 and EXEC paper.
• Supports 3-hole punch for 11" x 17", LTR and EXEC paper.
• Supports paper weights up to 130 lb cover (350 g/m
2
).
Q. Puncher Unit-BT1
• Inner puncher provides 2-hole and 4-hole punch capabilities for either the
Staple Finisher-W1 PRO or Booklet Finisher-W1 PRO.
• Supports 2-hole punch for LGL and LTRR paper.
• Supports 4-hole punch for 11" x 17", LTR and EXEC paper.
• Supports paper weights up to 130 lb cover (350 g/m
2
).
R. Document Insertion/Folding Unit-K1
• Inserts pre-printed cover sheets or insertion sheets up to 140 lb Index
(256 g/m
2
) for binding.
• The paper feed tray has a capacity of up to 100 sheets each (20 lb bond
(80 g/m
2
)).
• Provides support to Z-fold, Inner C-fold, Outer C-fold, and Half-fold
documents up to 28 lb bond (105 g/m
2
).
• Supports the Staple Finisher-AC1 and Booklet Finisher-AC1.