Canon imagePRESS Lite C170 - Page 78

Canon imagePRESS Lite C170 Series Service Guide
imagePRESS Lite C170 Series Service Guide March 2022
Revision 11 Page 70
Table 32 – POD Deck Lite-C1 Consumable Parts
Description
Part Number
2
Quantity
Estimated Life
68
Remarks
Pickup Roller
FL0-4500-000
1
1,000,000 sheets
Separation Roller
FC0-9631-000
1
1,000,000 sheets
Feed Roller
FC0-9450-000
1
1,000,000 sheets
2 Part numbers are subject to change without notice.
68 Value is based on LTR sized paper. Estimated average values in the field, based on data from
supplier. Data is subject to change depending upon many factors including, without limitation,
monthly copy volume, environment, type of image printed and customer handling of the equipment.
Table 33 – Booklet Finisher-W1 PRO / Staple Finisher-W1 PRO
Consumable Parts
Description
Part Number
2
Quantity
Estimated Life
68
Remarks
Stapler
FM2-6541-030
1
500,000 times
Saddle stapler
FM4-7572-000
2
300,000 times
Booklet Finisher
Feed Belt
FB5-9103-000
2
3,000,000 pages
Saddle Alignment Roller
FC8-7495-000
4
5,000,000 pages
Booklet Finisher
Upper/Lower Neat Paddle
FL3-7459-000
4
3,000,000 pages
Saddle Estrangement Roller
FL3-2010-000
2
1,000,000 pages
Booklet Finisher
Puncher Unit FE3-1671-000 1 1,000,000 times
Puncher Unit-
BS1
Puncher Unit FE3-1672-000 1 1,000,000 times
Puncher Unit-
BT1
Delivery Static Eliminator
FC9-3038-000
1
3,000,000 pages
Stack Delivery Roller Static
Eliminator
FE3-0006-000 1 3,000,000 pages
Belt Roller
FC6-6148-000
2
6,000,000 pages
Booklet Finisher
Saddle Inlet Roller Static Eliminator
FC9-1393-000
2
3,000,000 pages
Booklet Finisher
Saddle Inlet Static Eliminator
FC9-1432-000
1
3,000,000 pages
Booklet Finisher
Saddle Intermediate Static
Eliminator
FL3-2005-000 1 3,000,000 pages
Booklet Finisher
Saddle Feed Guide Lower Static
Eliminator
FC9-1394-000 3 3,000,000 pages
Booklet Finisher
2 Part numbers are subject to change without notice.
68 Value is based on LTR sized paper. Estimated average values in the field, based on data from
supplier. Data is subject to change depending upon many factors including, without limitation,
monthly copy volume, environment, type of image printed and customer handling of the equipment.