Canon iPF815 - Adjusting the Vacuum Strength (Vacuumstrngth)

Adjusting the Vacuum Strength (VacuumStrngth)
When printing on heavyweight paper or paper that curls or wrinkles easily, if paper rubs against the printer or the edge is
wrinkled from rubbing, adjusting the level of suction against paper on the Platen may improve results.
1. Press the Menu button to display MAIN MENU.
2. Press ▲ or ▼ to select Paper Details, and then press the ▶ button.
3. Press ▲ or ▼ to select the type of paper, and then press the ▶ button.
4. Press ▲ or ▼ to select VacuumStrngth, and then press the ▶ button.
5. Press ▲ or ▼ to select the level of suction against paper on the Platen, and then press the OK button.
Adjustments for Better Print Quality
> Adjusting the feed amount >
iPF815 Adjusting the Vacuum Strength (VacuumStrngth)
8
683
Downloaded from ManualsPrinter.com Manuals