LASER CLASS 730i/720i/710 Chapter 4: Maintenance and Service
4-60
SW11 (service soft switch 11: Dual-line function settings)
Bit Function 1 0
0 (New) Enable Access Codes Yes No
1 Not used
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 Not used
[Bit 0]
When the dual-line upgrade kit III is installed, you can select whether to specify the lines
used for calling. When “Yes” is selected, “ACCES CODE SETING” menu is displayed in
User Data.
To Next Page
Loading...
