LASER CLASS 730i/720i/710 Chapter 4: Maintenance and Service
4-62
SW33 (service soft switch 33: counter related)
Bit Function 1 0
0 (New) Count B4 as large size Yes No
1 (New) Indicate serial No. on counter Yes No
check screen
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 Not used
[Bit 0]
Use it to specify whether B4 paper should be count as large-size paper. If “Yes” is
selected, B4 paper will be counted as large-size paper. If “No” is selected, on the other
hand, B4 paper will be counted as small-size paper.
[Bit 1]
Use it to specific whether to indicate the machine serial No. on the Counter Check screen,
appearing when the Counter button is pressed. If “Yes” is selected, the serial No. will be
indicated. If “No” is selected, on the other hand, the serial No. will not be indicated.
To Next Page
Loading...
