LASER CLASS 730i/720i/710 Chapter 4: Maintenance and Service
4-86
7.1.2 Service report output functions
This fax outputs the service data setting status, past communications history reports, detailed
error information reports, etc. in service mode.
a) List of service reports
This fax outputs the service reports shown below.
Report type Operations
Service data list In the service mode, press the Report button, select the
System dump list report type, and press the Set button.
Key history report
Counter report
Jam/error log report
Print spec report
Transmission report If you set bits 0 and 1 of #1 SSSW SW01 in the service
(with service error code mode, the service error code and dump list are indicated
and dump list) on the activity report.
Reception report If you set bits 0 and 1 of #1 SSSW SW01 in the service
(with service error code mode, the service error code and dump list are indicated
and dump list) on the activity report.
To Next Page
Loading...
