LASER CLASS 730i/720i/710 Chapter 5: Appendix
5-64
b) Service soft switch
#1 SSSW
SW11 (service soft switch 11: Dual-line function settings)
Bit Function 1 0
0 (New) Enable Access Codes Yes No
1 Not used
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 Not used
[Bit 0]
When the dual-line upgrade kit III is installed, you can select whether to specify the lines
used for calling. When “Yes” is selected, “9.ACCES CODE SETING” is displayed in
User Data.
Figure 5-71 User Data Menu
1. TEL LINE SETTINGS
9. ACCES CODE SETING
Select the number (01-05) to be registered
ENTER ACCESS CODE
SET LINE ON
OFF
USE ACCESS CODE
LINE 1
LINE 2
ON
OFF
3. FAX SETTINGS
1. PAPER SETTINGS
Data Registration
1. USER SETTINGS
manuals4you.commanuals4you.com
To Next Page
Loading...
