Chapter 3 Print Media Handling 27
3 Prepare the envelopes for loading.
IMPORTANT
• Press down firmly on the edges of the envelopes to
make the folds crisp. Also, press firmly on the
area that corresponds to the edges of the back
flap.
• Remove any curling by holding the edges
diagonally and bending them gently.
• If the edges of the envelope are inflated or are
curling, place the envelope on a flat surface (such
as a desk).
• With a pen, press down while moving it from the
centre towards the edges of the envelope.
• Ensure that no curl or puff exceeds 1/8 in.
(3 mm).
Incorrect
Correct
Cross-sections of the
envelope edge
To Next Page
Loading...
