Chapter 4 Copying 32
Adjusting image quality (resolution)
You can adjust the image quality according to the document to be copied.
Follow this procedure:
1 Press [Menu] repeatedly until <4.IMAGE QUALITY> appears.
2 Use [] or [] to select the image quality.
–<NORMAL>: Suitable for text-only documents.
–<FINE (PHOTO)>: Suitable for photographs.
–<FAST>: Suitable for high speed copying at a lower resolution.
NOTE
•<NORMAL> cannot be selected when <GLOSSY>, <HIGH RES.>, <PHOTO PRO>, <PHOTO
PLUS>, or <OTHER> is selected as the print media type. (See page 29.)
•<FAST> is only available when <PLAIN> is selected as the print media type. (See page 29.)
3 Press [OK/Set].
NOTE
• When using <FAST>, if the quality is different from that expected, select <NORMAL> or <FINE
(PHOTO)> and try copying again.
4.IMAGE QUALITY
*NORMAL
To Next Page
Loading...
