Canon PC1182 - Using the Self-Timer

37
Shooting
You can set a 10 sec. ( ) or 2 sec. ( ) delay, or a custom delay
time and the number of shots ( Custom Timer), for shooting after
the shutter button is pressed.
To Cancel the Self-Timer
Follow procedure 1 to display .
Using the Self-Timer
Shooting Mode
1
FUNC. Menu * (Drive Mode) / / .
See Menus and Settings (p. 22).
* Default setting.
z : 2 sec. before the shutter
releases, the self-timer sound and
lamp will speed up.
z : The self-timer sound will play
when the shutter button is pressed and the shutter will
release 2 sec. later.
z : You can change the delay time (0 – 10, 15, 20, 30 sec.)
and number of shots (1 – 10) (p. 38). However, these
settings cannot be set for
(, ) , and
modes.
2
Shoot.
z When the shutter button is pressed fully, the self-timer lamp
will blink. When using red-eye reduction, the self-timer lamp
will blink and then stay lit for the last 2 seconds.