Canon PC1182 - Shooting

93
Troubleshooting
appears.
This displays when using a
memory card that has print
settings or transfer settings
set by other DPOF-
compliant cameras.
z These settings will be overwritten
by those set by your camera
(p. 85).
Noise displays./Subject’s movements are
irregular.
Camera automatically
lightened the image
displayed on the LCD
monitor to make it easier to
see when shooting in a dark
area (p. 15).
z There is no effect on the recorded
image.
Shooting
Camera will not record.
Mode switch is set to
(playback).
z Set the mode switch to
(shooting) (Basic Guide p. 4).
Flash is charging. z When the flash is charged, the
indicator will light orange.
Shooting is now possible (p. 20).
Memory card is full. z Insert a new memory card (Basic
Guide p. 1).
z If required, download the images
to a computer and erase them
from the memory card to make
space.
Memory card is not
formatted correctly.
z Format the memory card (p. 30).
z If reformatting does not work, the
memory card logic circuits may be
damaged. Consult the nearest
Canon Customer Support Help
Desk.
SD memory card is write
protected.
z Slide the write protect tab of the
SD memory card upward (p. 106).