78
Shooting in the Color Accent Mode
1
Still image: Control Dial
Movie: Control Dial
See Selecting a
Shooting Mode in
(Basic Guide p. 11).
2
.
z The camera will switch to color input
mode and the display will alternate
between the original image and the
color accent image (using the
previously set color).
3
Aim the camera so that the color you wish
to retain appears at the center of the LCD
monitor and press the button.
z Only one color can be specified.
z You can use the or button or the control dial to
specify the range of colors that are retained.
4
Press to complete the setting, then shoot.
z The default color accent is green.
z You may not obtain the expected results if you use the flash.
z The specified color accent is retained even if the camera’s
power is turned off.
Still image Movie
–5: Only takes the color that you want to retain.
+5: Also takes colors close to the one that you want to
retain.
To Next Page
Loading...
