96
2
Use the or button to select (Cut
Beginning) or (Cut End) and the or
button to specify the cut point ( ).
z To check a temporarily edited movie, select (Play) and
press the FUNC./SET button.
z Selecting (Exit) cancels the edit and restores the movie
control panel.
3
Select (Save) and press .
4
Select [New File] or
[Overwrite] and press .
z [New File] saves the edited movie
under a new file name. The pre-edit
data is left unchanged.
Note, if you press the FUNC./SET
button while saving the movie, saving is cancelled.
z [Overwrite] saves the edited movie with its original name.
The pre-edit data is lost.
z When there is not enough space left on the memory card,
only [Overwrite] can be selected.
Depending on the movie’s file size, it may take some time to
save an edited movie. If the batteries run out partway through,
edited movie clips cannot be saved. When editing movies, it is
recommended to use fully charged batteries or the AC
Adapter Kit ACK-DC20 (sold separately) (p. 138).
To Next Page
Loading...
Need help?
General
