38
Batch Transfer
1
In [WFT settings], select [Image sel./
transfer].
2
Select [Sel.n].
3
Select [Folder images not transfer’d].
To transfer images that could not previously be
transferred, select [Folder images failed transf.].
4
Select a folder.
5
Transfer the images.
Select [Transfer].
Select [OK] on the confirmation screen displayed
next.
X A transfer progress screen is displayed.
During image transfer, the <
LAN
> lamp blinks.
Batch Transfer of Images in a Folder
Selecting [Clear folder transf. history] will set the transfer history of images in the selected folder to
“unsent.” This enables you to resend all the images in the folder later by selecting [Folder images not
transfer’d].
To Next Page
Loading...
