▲
▲
14
■
Changing the password
This function allows you to choose
the desired password value (from 0
to 500).
Press the key and when the
new password value is required,
enter the desired value by means of
the and keys.
The instrument goes back to the
main menu, as shown on the figure
on the left. To reset your choices and
go back to the main menu press .
■
System
This function allows the user to se-
lect the type of electrical system by
choosing among single phase (1-
phase), balanced three-phase plus
neutral (3+N phases bal.), unbal-
anced three-phase plus neutral
(3+N phases unbal), three-phase
balanced (3 phases bal) and three-
phase unbalanced (3 phases unbal).
Choose the SYSTEM function by
means of the and keys,
press to confirm; then select the
desired system by means of the
and keys and confirm with .
Let’s start
Harmonic analysis
VT ratio
916
13
1.2..
..2.1
21
Measure
Measure