37
▲
▲
■
Digital filter
Select FILTER by means of and
and confirm with . Select the
function to be set from one of the
submenus by means of the and
keys and confirm it with .
You can choose among the follow-
ing 3 selections:
• DISPLAY: to select the display of
the measurements of the instanta-
neous variables at 4-digit (max 9999)
or 3
1
/
2
-digit (max 1999)
• RANGE, to set the operating range
of the digital filter. The value is ex-
pressed as % of the full scale value.
• COEFFICIENT, to set the filtering
coefficient of the instantaneous meas-
urements. Increasing the value, also the stability and the
settling time of the measurements are increased. Once one of
the three parameters has been selected, set the desired value
by means of the and keys and confirm it with . To
exit the “FILTER” menu, press . For any other info, see
“Useful info, Ex. 2 on page 40).
■
Language
Select LANGUAGE from the main
menu by means of the and
keys and confirm with . Select
the language to be set from the
submenu with the and keys
and confirm the selection with .
To exit from any of the menus or
cancel a selection, press .
Outputs / Other settings
Analogue outputs
35
29
What’s ASY
41
To Next Page
Loading...
Need help?
General
