Carrier 30MP - Equipment Touchscreen Navigation; 30 MP Multi-chiller Equipment Touch Screens

Appendix D: Touchscreen settings
30MP Multi-chiller CARRIER CORPORATION ©2018
Installation and Start-up Guide All rights reserved
50
To assign a file with custom touchscreens
1 Prepare a USB drive that:
○ is formatted as FAT 32
○ contains a folder named
Touch
○ the .stv file is in the
Touch
folder
2 From the
Setup
screen, click
Viewfile
.
3 Plug your USB drive into the System Touch device.
4 Click
OK
.
NOTE
The System Touch indicates the upload progress.
5 If you do not see your custom screens, you should reload the firmware by going to the
Setup
screen >
Touchscreen Setup
>
Reload Firmware
.
30MP Multi-chiller's Equipment Touch navigation screens
Screen Names
Display
Details
Standby
Not an interactive screen. Touch anywhere to advance to
Home
screen.
Screen displays after the
Inactivity
Timer
expires (default is 5 minutes).
Displays:
• Controlling temperature
• Control type
• Plant Run Command
• Occupancy
• Outdoor air temperature, if
available