Carrier 30MP - Linkage Source Address Setup; Collector Network Number

Appendix D: Touchscreen settings
30MP Multi-chiller CARRIER CORPORATION ©2018
Installation and Start-up Guide All rights reserved
53
Screen Names
Display
Details
Linkage Source
Address
Click on the bottom to navigate to
Chiller Linkage
.
Set up Linkage using the following
properties:
• Collector Network Number
• Address type: IP or MS/TP
• MS/TP Address of the Collector
• IP Address of Collector (to set an
IP address, the MS/TP address
must be set to "0")
Linkage Menu
Navigate to the following Linkage
details for each chiller:
• Linkage Status
• Linkage Configuration
• Linkage Configuration Reset