61
POWER+ Equivalent to holding the key for approximately 3 seconds.
MENU+ Equivalent to holding the
key for approximately 3 seconds.
UNIT+ Equivalent to holding the
key for approximately 3 seconds.
PRINT+ Equivalent to holding the
key for approximately 3 seconds.
RECALC Equivalent to the [RECALC] key of the AKB-301Application Keyboard
C Equivalent to the [C] key of the AKB-301 Application Keyboard
(iii) Commands related to Application Measurement
PEAK Sets the Peak Hold mode.
AZERO Sets the Auto Zero mode ON.
INTERVAL Sets the Interval Timer mode.
MEMORY Sets the Memory mode.
M Immediately operates after setting the Memory mode,.
ADDON Sets the Auto-Memory and Zeroing mode.
+ Immediately operates after setting the Auto-Memory and Zeroing mode,.
A Sets the Animal Weighing mode.
ANIMAL Sets the Animal Weighing mode.
R Releases the Application weighing mode.
(iv) Commands related to unit conversion
g Switches to "g" unit
kg Registration of "kg" unit and switching
mg Registration of "mg" unit and switching
PERCENT Registration of "%" unit and switching
% Sets 100% when display is in "%" unit.
G kg <- -> % switching
PCS Registration of "PCS" unit and switching
CT Registration of "karat" unit and switching
MOM Registration of "monme" unit and switching
SDENSE Registration of "solid density" unit and switching
LDENSE Registration of "liquid density" unit and switching
CU Switches to "user" unit (Set the conversion coefficient beforehand.)
RSTUNIT Returns the default units.
(v) Readout commands of set value
TARGET Readout of target set value
LIMIT Readout of limit set value
G.LO Readout of lower limit set value in Group mode
G.LO Readout of upper limit set value in Group mode
L.LO Readout of lower limit set value in Level mode
L.UP Readout of upper limit set value in Level mode
UW Readout of unit weight set value
G/PCS Equivalent to g/PCS key
To Next Page
Loading...
