1. Introduction
■ Introduction
This product as an indicator for weighing instruction and control is designed for the most
suitable use of any meters (packer, weigh separator, platform scale, various tensile and
compression test equipment) that can be applied in the widest way throughout industries.
This product ensures communications with external devices such as computers as it basically
installs an RS-232C port.
In addition, this product can be conveniently used for the weighing control as it basically has
three relay outputs necessary for control (applicable only if there is relay out).
Please utilize all the functions in this product sufficiently as you can use the device properly
with good knowledge of this manual before you use this product.
■ Features
· Measures to screen off external noises
· Built-in self-diagnosis and self-recovery functions from failure
· External resolution : 1/20,000
· Electrostatic data memory
· 2 built-in external relay input terminals (zero, tare/tare removal)
· Data memory
· 24V of input power supply can be used with the use of DC power supply regardless of
polarity (500mA < Trans Type > or more is recommended)
· FAC (Full Auto Calibration) method for calibration
· Equivalent input method for Calibration
· Basic installation of RS-232C
· Option : RS-422/485
· Option : I/V-OUT
To Next Page
Loading...
