CAS CL series User Manual

14
0
Enter department range to check.
EX) dept 1 ~ dept 10
You can see department sales data by
pressing “PRINT” key.
To print report, press the “TEST” key.
To exit this menu, press “ESC” key.
Note: If the setting of MENU 1872 (Print All Report within Range) is set to NO, then
Departments within the range with no sales data are not printed. If set to YES, then
all Departments within the range will print regardless of no sales data.

CAS CL series Specifications

General

Display	LCD
Readability	0.1 g / 0.2 g / 0.5 g / 1 g
Interface	RS-232
Units	g, kg, lb, oz
Features	Counting, percentage weighing, checkweighing
Material	Stainless steel
Capacity	6 kg / 15 kg / 30 kg