CAS CL7200 series - Delete Cutting Hall (Menu Code 1363); List Cutting Hall (Menu Code 1362)

101
2.10.1.2. List Cutting Hall (Menu code 1362)
(MENU → 3. PLU Date Table II → 6. Cutting Hall → 2. List )
1. Set the list range
• Set the list range to check
EX) Cutting Hall No.’s 1~10
• Press Print Key to List Cutting Hall No.'s on screen.
After Cutting Hall No.'s are listed on the screen, pressing the TEST key will print the
Cutting Hall No.'s.
2.10.1.3 Delete Cutting Hall (Menu code 1363)
( MENU → 3. PLU Date Table II → 6. Cutting Hall → 3. Delete )
1. Enter cutting hall number to delete