167
2.15.7 X1/X2 Group Report (Menu code 1614/1644)
( MENU → 6. Report → 1. X1 Report /X2. Report → 4. Group )
Enter group range to check
If you do not set group in PLU setting, it is
1 : Miscellaneous by-count
Ex) Group 1 ~ Group 23
You can see group sales data by pressing
“PRINT” key.
To print report, press the “TEST” key.
* If your scale is in label mode, the scale shows “Do you want to print on label?”.
* If your label has gap, press 1. if you want to print report on ticket, press 0 and change the
setting to Ticket in menu 1731 then change your label to ticket.
To exit this menu, press “ESC” key.
Note: Misc. If the setting of MENU 1872, “Print All Report within Range” is “No”, the
group with no sales is not printed. But if “Yes”, all group sales data within the range
is printed.
To Next Page
Loading...
