61
• Press Print Key to List Origins on screen. After Origins are listed on the screen, pressing the
TEST key will print the Origins.
2.2.5.3 Delete Origin (Menu code 1253)
( MENU → 2. PLU Data Table I → 5. Origin → 3. Delete )
1. Enter Origin No.
EX) Delete Origin 10.
Note: There is no confirmation request when deleting a Origin. Pressing the PRINT key will
cause the Origin entered to be deleted.
2.2.6 Barcode (Menu code 1260)
( MENU → 2. PLU Data Table I → 6. Barcode )
Up to 99 different Bar Code Formats can be programmed in the CL7200 series. Different BarCode
Formats can be assigned to individual PLU's or one Bar Code Format can be used for all PLU's
by enabling the Global Barcode Format Setting (Menu 1520).
2.2.6.1 New/Edit Barcode (Menu code 1261)
( MENU → 2. PLU Data Table I → 6. Barcode → 1. New/Edit )
1. Enter Barcode No.
• This value can be from 1 to 99.
EX) Barcode No = 1
2. Barcode Description.
EX) Barcode Description = EAN13-1
3. Barcode Type
• Reference following table.
To Next Page
Loading...
