141
3. Set separators for “TIME”, using
ASCII code table on page
EX) Time Separator = [:]
Please refer to “ASCII Code Table” (chapter 4.4) to inp☞ ut special characters in Date
or Time separator.
4. Press “PRINT” key to save it and go out to SCALE CONFIGURATION main
menu.
2.14.5 User/ Security Configuration (Menu code 1850)
( MENU → 8. Scale Config → 5. User/Security Configuration )
This section is to create, edit, change, list, delete clerk’s security
information and configure security level.
2.14.5.1 New/Edit User(Menu code 1851)
( MENU → 8. Scale Config → 5. User/Security Con → 1. New/Edit )
Enter appropriate USER data for CLERK number, CLERK NAME,
NICKNAME, CLERK PASSWORD, CLERK LEVEL, and Use For Training.
EX) CLERK No.=[2],
CLERK NAME =[CHRISTOPER],
NICKNAME =[CHRIS],
To Next Page
Loading...
