CLERK PASSWORD =[0115],
CLERK LEVEL =[3],
USE FOR TRAINING = [N]
Note: If you use floating mode, you have
to register all clerks.
▶ NEW/EDIT USER in USER’S Security Condition
No Operation Modes Description
1 Clerk No. This value can be from 1 to 95.
2 Clerk Name This value is available up to 22 characters.
3 Nickname
This value is available up to 7 characters. It can be
printed on a label and displayed on the scale.
4 Clerk Password 4 digit (alphanumeric)
5 Clerk Level 0~3 level
6 Use for Training Training account
Password: When you enter the password, you have to type clerk number(2digit) and
password(4 digit). For example, if your clerk number is 20 and password is 1234, you
have to type 201234. Minimum password is 3 digit and maximum password is 6 digit.
If there is no level 3 clerk, you can use default value. (Clerk No:1, password:1, Level:3)
Therefore default password is 011.
• You have to set a level 3 clerk. If there is no level 3 clerk, you can use default
password(011) and if any, you cannot use it.
Clerk level: This value can be from 0 to 3. This level is related to menu
1855(Config permission). If clerk 2 is set to level 2, this clerk can use the
function which is set to level 1, 2 in menu 1855 and cannot use the function
To Next Page
Loading...
