2.6 Speed Key Setting (Menu code 1160)
( MENU → 1. PLU → 6. Speed Key )
This menu is used to program Speed keys. Speed keys are short-cut keys used to allow
quick access to the most frequently used PLU's in a department.
1. Speed Key Set No.
You can program up to 5 different Speed Key Sets but only one set can be used in a
department at a time. The Speed Key Set that is used in a department is determined
by Menu code 1211 (chapter 2.2.1.1)
Select speed key set no. You can use this number when you program menu 1211.
EX1) Speed key set No. = 2
2. Speed Key Programming
• The Speed keys are numbered left-to-right and top-to-bottom. there are 72 keys if you press
the SHIFT key and then one of the 72 Speed keys, then you can access Speed keys 73
through 144
EX1) Speed key no. 1
3. PLU No.
• Enter PLU no. to assign speed key
• PLU should be belong to scale department.
* Press the "TEST" key in this column will be assigned to function keys instead of the PLU. For
the function number, please see the description of the menu 1880.
EX1) PLU 10 = BEEF
4. Background Color
You can set the key color. The list is shown below.
1: White, 2: Gray, 3: Dodger Blue, 4: Royal Blue, 5: Midnight Blue, 6: Green, 7: Orange, 8:
Pink, 9: Purple
5. Font Color
You can change the text color that appears on the speed key.
1: Black, 2: Red, 3: Green, 4: Blue, 5: Yellow, 6: Aqua, 7: Pink, 8: White, 9: Gray
To Next Page
Loading...
