65
EX) Delete barcode 1.
Note: There is no confirmation request when deleting a Barcode. Pressing the PRINT
key will cause the Barcode entered to be deleted.
2.2.7 Tare (Menu code 1270)
( MENU → 2. PLU Data Table I → 7. Tare )
The CL7200 series can be programmed to use a Tare No. instead of a numeric
value.(System Parameter 584) If you are using Tare Numbers they should be
programmed prior to programming any PLU's that use a Tare weight.
Note: Tare weights for use in Tare No.'s can be programmed using the known numeric
value or by placing the actual container on the scale.
2.2.7.1 New/Edit Tare (Menu code 1271)
( MENU → 2. PLU Data Table I → 7. Tare → 1. New/Edit )
1. Enter Tare No.
• This value can be from 1 to 99.
EX) Tare No. = 1
2. Tare Description
EX) Tare Description = Container
3. Tare Type
• There are 2 types of Tare Weights that can
To Next Page
Loading...
