CAS CL7200 series - Tare Key (Menu Code 1274); Unit Symbol (Menu Code 1280)

68
Note: There is no confirmation request when deleting a Tare No. Pressing the
PRINT key will cause the Tare No. entered to be deleted.
2.2.7.4 Tare Key (Menu code 1274)
( MENU → 2. PLU Data Table I → 7. Tare→ 4. Tare Key )
This menu allows you to assign the Tare No.'s (Menu 1271) to Tare Keys. Tare Keys
must be programmed using Menu 1880 Function Key Define. There is a maximum of 9
Tare Function Keys available.
Note: When Special Function Keys are programmed they take the place of PLU
Speed Keys, reducing the number of Speed Keys accordingly.
1. Enter tare Key.
EX) Tare Key = 1
2. Enter tare number
EX) Tare No = 1
Note: Tare No.’s can be 1 to 99.
Tare Keys are 1 to 9 only.
2.2.8 Unit Symbol (Menu code 1280)
( MENU → 2. PLU Data Table I → 8. Unit Symbol )
This menu allows you to program or change the Unit Symbol that will print on the
label for Non Weight or By Count PLU’s.