CAS CL7200 series - A;D Test (Menu Code 1862); Display Test (Menu Code 1861); Keyboard Test (Menu Code 1863)

149
2.14.6.1 Display Test (Menu code 1861)
( MENU → 8. SCALE CONFIG → 6. Test → 1. Display )
It automatically start to test display. You can exit from testing, by pressing “PREV.” key.
2.14.6.2 A/D Test (Menu code 1862)
( MENU → 8. SCALE CONFIG → 6. Test → 2. A/D )
To set zero press “ZERO”
User may exit from this menu, using “ESC” key
2.14.6.3 Keyboard Test (Menu code 1863)
( MENU → 8. SCALE CONFIG → 6. Test → 3. Keyboard )