CAS CL7200 series - Product Data Management; Ingredient Programming

7
2
2.3.1.2 List Ingredient (Menu code 1312)
( MENU → 3. PLU Data Table II → 1. Ingredient → 2. List )
1. Set the list range
EX) Ingredient No.’s 1~10
※ Press Print Key to List Ingredient No.’s on screen.
After Ingredient No.’s are listed on the screen, pressing the TEST key will print the
Ingredient No.’s
2.3.1.3 Delete Ingredient (Menu code 1313)
( MENU → 3. PLU Data Table II → 1. Ingredient → 3. Delete )
1. Enter ingredient number to delete
EX) Delete ingredient no. 1