Apex2
29
Declarations
WIRELESS BLUETOOTH 4.0 CONNECTIVITY
All models support wireless connection via Bluetooth® 4.0 (Low energy or Smart). This
connectivity is compatible with mobile and PC devices that support Bluetooth® 4.0 only.
TX power: 0 dBm to -23 dBm
Receiver sensitivity: -93 dBm
Range: Typically >25m line-of-sight and depending on local RF conditions.
The instrument contains a Bluetooth® Low energy wireless transmission module, BLE113
from Bluegiga technologies. The Bluetooth® Qualified Design IDs for this module are:
Bluetooth Controller QDID: B021015, Bluetooth Smart Software: QDID B018942
Copies of the modules regional approvals certificates may be obtained from Casella or
Bluegiga.
This product contains an FCC and Industry Canada certified Bluetooth® Low energy wireless
transmission module:
FCC IDENTIFIER: QOQBLE113
Industry Canada IC:5123A-BGTBLE113(Single)
Producer: BlueGiga Technologies Inc.
Model: BLE113 Bluetooth smart module
Modular Type: Single Modular
FCC CONFORMITY STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation
RADIATION EXPOSURE STATEMENT
The product complies with the FCC portable RF exposure limit set forth for an uncontrolled
environment and is safe for intended operation as described in this manual.
To Next Page
Loading...