Apex2
8
Introduction
The Apex2 is the latest generation of personal sampling
pump, which can now be monitored from your mobile
phone or tablet without disturbing the wearer using the
Airwave App and Bluetooth® 4.0 connectivity (Plus and
Pro models). On models without remote connectivity, all
the running parameters are clearly displayed on the
pump LED screen.
Motion sensing allows you to confirm that the pump is
being worn, and the slim ergonomic design provides a
high degree of wearer acceptance. To provide greater
protection against dust and water ingress the pump is
IP65 rated and its smooth finish makes it easier to decontaminate.
The Apex2 has a maximum flow rate of 5 l/min and an impressive back pressure capability,
which ensures it operates reliably with a wide range of filter media. Inlet pressure is
continually sensed to establish filter loading and aid diagnostics. Gas and vapour collection is
also possible using the gas bag outlet on the pump.
On a full battery charge the pump is designed to operate for up to three 8 hr shifts before it
needs to be charged up. A gauge shows the battery charge level, and on Pro and Plus
models, the remaining run time.
The following table summarises the features and capabilities of the Apex 2 range of pumps.
To Next Page
Loading...
