E-100
The x Second Hand indicates N (NO) when I check the result of the latest
receive operation.
Possible Cause Remedy Page
You are wearing or moving the •
watch, or performing a button
operation during the signal receive
operation.
The watch is in an area with poor •
reception conditions.
Keep the watch in an area where reception
conditions are good while the signal receive
operation is being performed.
E-30
You are in an area where signal
reception is not possible for some
reason.
See “Approximate Reception Ranges”. E-27
The calibration signal is not being
transmitted for some reason.
Check the website of the organization •
that maintains the time calibration signal
in your area for information about its
down times.
Try again later. •
—
To Next Page
Loading...
