Casio 5142 - Configuring Current Time and Date Settings Manually; To Change the Current Time Setting Manually

E-55
Configuring Current Time and Date Settings Manually
You can configure current time and date settings manually when the watch is unable
to receive a time calibration signal.
To change the current time setting manually
In the Timekeeping Mode, unlock the crown and then 1.
pull it out.
This will cause the •
x Second Hand to move to the city
code of the currently selected Home City.
At this time, the mode pointer will point to the current •
daylight saving time setting (STD, STD-AT, DST or
DST-AT).
If you do not perform any operation with the crown •
for about three minutes after pulling it out, crown
operations will become disabled and the hand will not
move if you rotate the crown. If this happens, push
the crown back in and then pull it out again.

@
TYO (TOKYO)