Casio 5142 - Configuring Home City Settings; To Configure Home City Settings

To Next Page

To Previous Page

E-45

Conﬁguring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting

either standard time or daylight saving time (DST).

To conﬁgure Home City settings

Note

This watch does not have a city code that •

corresponds to Newfoundland.

Press and hold the crown button (without unlocking 1.

the crown) for at least two seconds.

This will enter the Timekeeping Mode (page E-42). •

Unlock the crown and then pull it out.2.

This will cause the •

x Second Hand to move to the

city code of the currently selected Home City.

This indicates the city code setting mode. •



TYO (TOKYO)

Main Page

Using the Crown5
To Disable Crown Button Mode Switching10
To Re-Enable Crown Button Mode Switching11
Things to Check before Using the Watch12
Table of Contents14
Charging the Watch18
To Recover from the Sleep State25
Radio Controlled Atomic Timekeeping26
To Get Ready for a Receive Operation32
To Perform Manual Receive35
To Check the Result of the Latest Receive Operation37
Mode Reference Guide39
To Determine the Watch's Current Mode42
To Return to the Timekeeping Mode from any Other Mode42
To Select a Mode43
Timekeeping46
Configuring Home City Settings47
To Configure Home City Settings47
To Toggle the Home City Time between Standard Time and Daylight Saving Time53
To Manually Override a Time Calibration Standard Time/Daylight Saving Time Setting55
Configuring Current Time and Date Settings Manually57
To Change the Current Time Setting Manually57
To Change the Current Date Setting Manually61
Using the Stopwatch (Stopwatch Split Mode)65
To Perform Elapsed Time Measurement67
To Perform an Elapsed Time Operation67
To Pause at a Split Time67
Using the Stopwatch (Stopwatch Lap Mode)71
To Enter and Exit the Stopwatch Lap Mode72
To Perform an Elapsed Time Operation73
To Perform Lap Time Measurement73
To Recall Lap Data74
Using the Countdown Timer75
To Specify the Countdown Start Time76
To Perform a Countdown Timer Operation78
To Stop the Alarm79
Using the Alarm80
To Change the Alarm Time Setting81
To Check the AM/PM Setting of the Alarm84
To Turn the Alarm on or off84
To Stop the Alarm84
Checking the Current Time in a Different Time Zone85
To View the Time in Another Time Zone86
To Check Whether a Time Zone Is am or PM88
To Specify Standard Time or Daylight Saving Time (DST) for a City88
Adjusting Home Positions90
To Adjust Home Positions91
Troubleshooting95
Specifications107
Operating Precautions109
User Maintenance118

Casio 5142 - Configuring Home City Settings; To Configure Home City Settings

Table of Contents

Related product manuals