E-46
If you do not perform any operation with the crown •
for about three minutes after pulling it out, crown
operations will become disabled and the watch
hands will no longer move when you rotate the crown.
If this happens, push the crown back in and then pull
it out again.
For details about city codes, see the “City Code •
Table” at the back of this manual.
Rotate the crown to move the 3.
x Second Hand to the
city code you want to select as your Home City.
Each time you change to a different city code, the •
z Hour Hand, c Minute Hand, and n Day move
to the current time and date for that city code. Also,
the
v Mode Disk rotates until the mode pointer is
pointing at STD, STD-AT, DST, or DST-AT (see step
4 of this procedure below).
To Next Page
Loading...
