Casio 5142 - To Toggle the Home City Time between Standard Time and Daylight Saving Time

E-51
To toggle the Home City time between standard time and daylight saving time
Perform steps 1 through 3 under “To configure Home 1.
City settings” on page E-45.
Each time you select a city code, the •
z Hour Hand
and
c Minute Hand move to the current time for that
city code.
Press 2. A to toggle the time for the currently selected
city code between standard time and daylight saving
time.
The mode pointer will point to either • STD (standard
time) or DST (daylight saving time) on the
v Mode
Disk, which indicates the current daylight saving
time setting.
While auto setting (AT) is enabled, the •
v Mode Disk
pointer will point to either STD-AT or DST-AT to
indicate the current STD/DST setting.

+B
>