E-76
To perform a countdown timer operation
A
A B
Start Stop Reset
Pressing • B while the Countdown Timer is stopped resets the displayed time to the
start time specified by you.
Pressing • B will not perform a reset while the watch is performing any of the
following operations.
While the hands are moving to the current timer time after you enter the −
Countdown Timer Mode.
While the displayed date is changing at midnight. −
Before starting a countdown timer operation, check to make sure that the •
countdown timer is not already operating (indicated by a moving
x Second Hand).
If it is, press A to stop it and then B to reset to the countdown start time.
All hands move counterclockwise during a countdown. They automatically switch to •
clockwise movement when elapsed time measurement begins after the countdown
is complete. An elapsed time measurement operation will continue until you press
A to stop it.
To Next Page
Loading...
