E-30
To get ready for a receive operation
Confirm that the watch is in the Timekeeping Mode. If it isn’t, push in and hold the 1.
crown for at least two seconds to enter the Timekeeping Mode.
Place the watch in a location where signal reception is good.2.
12 o’clock
or
Position the watch as shown in the •
nearby illustration, with 12 o’clock
pointed towards a window. Make
sure there are no metal objects
nearby.
Signal reception normally is better •
at night.
The receive operation takes from •
two to seven minutes, but in some
cases it can take as long as 14
minutes. Take care that you do not
perform any button operation or
move the watch during this time.
To Next Page
Loading...
