E-79
To change the alarm time setting
Press the crown button to navigate to the Alarm Mode.1.
The mode pointer will point to • AL on the
v Mode Disk.
Unlock the crown and then pull it out to enter the alarm setting mode.2.
The •
x Second Hand will move to either A (AM) or P (PM).
If you do not perform any operation with the crown for about three minutes after •
pulling it out, crown operations will become disabled and the watch hands will no
longer move when you rotate the crown. If this happens, push the crown back in
and then pull it out again.
You can toggle between the hour and minute setting mode, and the hour only •
setting mode by pressing B.
Hour/Minute Hour
B