E-80
Rotate the crown to set the alarm time.3.
Rotating the crown two full consecutive turns away from you will cause the •
c Minute Hand to start moving clockwise. Rotating the crown another two full
consecutive turns away from you will cause the
c Minute Hand to start moving
at high speed. To stop hand movement, press any button or rotate the crown one
full turn towards you.
Press 4. B to switch to the hour setting mode.
The •
z Hour Hand will move slightly left and right to indicate the z Hour Hand
setting mode.
If you want to change the hour setting without changing the minute setting, skip •
step 4 above.
When adjusting the alarm time setting, check to make sure that the •
x Second
Hand correctly indicates A (AM) or P (PM).
Rotate the crown to adjust the hour setting only.5.
Rotating the crown two full consecutive turns away from you will cause the •
z Hour Hand to start moving clockwise.
To Next Page
Loading...
