E-84
To view the time in another time zone
Unlock the crown and then pull it out.1.
The •
x Second Hand points to the currently selected World Time city code.
The mode pointer will point to either • STD (standard time) or DST (daylight saving
time) on the
v Mode Disk, which indicates the current daylight saving time
setting.
If you do not perform any operation with the crown for about three minutes after •
pulling it out, crown operations will become disabled and the watch hands will no
longer move when you rotate the crown. If this happens, push the crown back in
and then pull it out again.
Rotate the crown to move the 2.
x Second Hand to the city code you want to select
as the World Time City.
Each time you select a city code, the •
z Hour Hand, c Minute Hand, and n Day
move to the current time and date for that city code. For details about city codes,
see the “City Code Table” at the back of this manual.
To Next Page
Loading...
