E-62
Rotate the crown to adjust the year setting.8.
If you want to change the time setting at this time, press • B and then perform
the procedure starting from step 4 under “To change the current time setting
manually” (page E-55).
After the settings are the way you want, push the crown back in to return to the 9.
Timekeeping Mode. Next, lock the crown.
This causes timekeeping to resume with the •
x Second Hand starting from
12 o’clock.
Rotating the ring without pushing it down as far as it will go will change the •
settings of the watch. When locking the crown, be sure to press down firmly on
the ring as you rotate it.
Note
The watch’s built-in full automatic calendar makes allowances for different month •
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s rechargeable battery replaced or after
power drops to Level 3.
To Next Page
Loading...
