E-94
The x Second Hand is moving at two-second intervals.
All the watch’s hands are stopped at 12 o’clock and none of the buttons work.
Power may be low. Expose the watch to light until the
x Second Hand starts moving
normally, at one-second intervals (page E-18).
The hands of the watch suddenly start moving at high speed, even when I do
not perform any operation.
This could be due to any one of the following causes. In all cases, the hand movement
does not indicate malfunction, and should stop shortly.
The watch is recovering from a sleep state (page E-23). •
The time setting is being adjusted following a successful auto time calibration •
signal receive operation (page E-24).
The watch is returning to the Timekeeping Mode automatically from the Alarm Mode •
(page E-78).
To Next Page
Loading...
