PRINTING IMAGES
187
4.
Connect the USB cable that comes bundled
with the camera to the USB cradle and a
printer.
• Also, connect the AC adaptor to the USB cradle and
plug the AC adaptor into an electrical outlet.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• Nothing appears on the camera’s monitor screen if
the camera is on the USB cradle while the bundled
AV cable is connected to the cradle. Be sure to
disconnect the AV cable from the cradle if you want
to use the camera’s monitor screen to view images.
USB port
Connector A
USB cable
(bundled)
Connector B
[ ](USB port)
5.
Turn off the camera, and then set the camera
on the USB cradle.
6.
Turn on the printer.
7.
Load paper for printing the images into the
printer.
8.
Press the USB
cradle’s [USB] button.
• This displays the print
menu on the camera’s
monitor screen.
To Next Page
Loading...
Need help?
General
