OTHER RECORDING FUNCTIONS
87
• This starts the white balance adjustment procedure.
The message “Complete” appears on the monitor
screen after white balance adjustment is complete.
5.
Press [SET].
• This registers the white balance settings and returns
to the currently selected recording mode.
NOTE
• After you adjust white balance manually, the setting
remains in effect until you change it or until you turn
off the camera.
Using Continuous Shutter
In addition to normal recording that records a single image
each time the shutter button is pressed, you can select one
of the three continuous shutter modes to record multiple
images.
• Normal-speed continuous shutter
You can continually record images until memory becomes
full.
• High-speed continuous shutter
Record up to three consecutive images at high speed.
• Flash continuous shutter
Use this mode to record up to three consecutive images,
firing the flash for each one.
1.
In the REC mode, press [MENU].
2.
Select the “REC” tab, select “Continuous”,
and then press [왘].
To Next Page
Loading...
Need help?
General
