USING THE CAMERA WITH A COMPUTER
208
USING THE CAMERA WITH A COMPUTER
This section explains the software and applications on the CD-ROM that comes bundled with the camera, and provides an
overview of what you can do with them.
Note that the procedure you need to perform depends on whether you are using computer running under Windows (see below)
or a Macintosh (see page 222).
Using the Camera with a Windows Computer
Your digital camera comes bundled with useful applications for using it in combination with a computer. Install the applications
you need on your computer.
Selecting the Software You Need
Install the software on your computer that allows you to perform the type of operations you want.
Purpose
USB connection to a
computer for image transfer
Transfer of images from the
camera and management of
images on the computer
Software Name
–
USB driver Type B
Photo Loader 3.0
* DirectX 9.0c
Supported Windows Versions
XP/2000/Me
98SE/98
XP/2000/Me/98SE/98
Required Operation
Use the USB cradle to establish a connection
between the camera and computer. Installation
of the USB driver is not required (page 192).
Use the USB cradle to establish a connection
between the camera and computer. Install the
USB driver
Type B
(page 192).
Install Photo Loader 3.0
(page 211)
.
* If the computer does not have DirectX 9.0 or
higher installed, install DirectX 9.0c (page
213).
To Next Page
Loading...
Need help?
General
