OTHER RECORDING FUNCTIONS
96
Shooting with High Sensitivity
Higher sensitivity makes it possible to record brighter
images, without using flash, even when there is not enough
lighting available to obtain normal exposure.
1.
In the REC mode, press [BS] (BEST SHOT).
2.
Use [왖], [왔], [왗], and [왘] to select the “High
Sensitivity” scene, and then press [SET].
3.
Press the shutter button to record the image.
IMPORTANT!
• High Sensitivity is disabled automatically when any
setting other than “Auto” is selected for ISO
sensitivity. If you want High Sensitivity to be
operational after turning it on, be sure to change the
ISO sensitivity setting to “Auto” (page 120).
• Recording with high sensitivity can cause an image
to appear somewhat coarser than normal and can
cause slight deterioration of image resolution.
• A desirable level of image brightness may not be
possible under very dark conditions.
• When shooting with slow shutter speeds, use a
tripod to protect against the effects of hand
movement.
• High Sensitivity is disabled while the flash setting is
“Auto Flash” or “Flash On”.
• The camera sometimes performs an automatic noise
reduction operation to reduce digital noise in images
recorded under certain lighting conditions. This
operation causes the camera to take longer than
normal to store the image and be ready for the next
shot.
To Next Page
Loading...
Need help?
General
