GETTING READY
34
2.
Turn off the camera.
3.
With the camera
positioned with the
monitor screen
facing forward as
shown in the
illustration, place it
onto the USB cradle.
• Do not place the
camera onto the USB
cradle while it is turned
on.
• The [CHARGE] lamp on the USB cradle should turn
red, indicating that charging has started. When
charging is complete, the [CHARGE] lamp will turn
green.
• It takes about 180 minutes to achieve a full charge.
Actual charging time depends on current battery
capacity and charging conditions.
4.
After charging is complete, remove the
camera from the USB cradle.
NOTE
• The bundled AC adaptor is designed for operation
with any power supply in the range of 100V to 240V
AC, 50/60Hz. This means the AC adaptor can be
used in various countries around the world. Note,
however, that there may be some problems with the
AC power cord withstand voltage and with the
configuration of power outlet shapes in certain
geographic areas. Before trying to use the AC
adaptor in another country, be sure to check with
your travel agent concerning the local power supply.
• Never use the AC adaptor with a voltage converter.
[CHARGE] lamp
To Next Page
Loading...
Need help?
General
